Shredder OREC STAND-ON ZHR800 Honda 389 cc engine crawler tracked cutting width 80 cm

NEW AVAILABLE FROM SPRING 2024 Tracked mower OREC STAND-ON ZHR800 Technical characteristics: Engine: Honda GX390 - 389 cc Cutting width: 80 cm Cutting height: 30 to 80 mm Two speed ranges: Low range: forward 0 to 4.5 km/h Reverse 0 to 2. 6 km/h High range: forward from 0 to 7.5 km/h Reverse from 0 to 4.5 km/h Transmission: hydrostatic (2 HST pumps linked to mechanical differential) Operator platform Features Thanks to the two independent hydraulic pumps, the ZHR800 is a zero-turn (360 ) stand-on flail mower. The new OREC Zero Turn hydrostatic transmission increases the productivity of the ZHR800, which achieves twice the working capacity of a track-mounted mulcher of the HRC8xx series. In fact, under the best working conditions, the ZHR800's maximum speed is 7.5 km/h compared to 3.5 km/h for the HRC813. The operator, on the platform, has a wider view than on a conventional flail mower. In an emergency, the operator can dismount from the machine, bringing it to an immediate stop. The ZHR800 is also equipped with four lifting eyebolts, which are useful when the machine needs to be lifted over an obstacle or unloaded from the van. Its compact dimensions make it transportable even in small to medium vans. The cutting unit can be raised almost vertically to facilitate cleaning and maintenance of the knife drum. This lifting angle is only permitted for maintenance purposes. CZ